Username: Password:

Author Topic: A15 Headstock Logo needed  (Read 1867 times)

Offline jimmysoap

  • Newbie
  • *
  • Posts: 3
    • View Profile
A15 Headstock Logo needed
« on: July 15, 2013, 10:42:15 AM »
Hey all,  I recently bought an A15 that had been through hurricane Sandy.  The headstock laminate was peeling off,  so I managed to get it off in 1 piece.  But,  it needed a lot of sanding and such.  Anyway,  the logo is now gone and I can't put it back together until I get one.    Does anyone have a decal?  or even a really sharp digital picture of this Washburn logo.   

Offline psp742

  • Sr. Member
  • ****
  • Posts: 431
  • buy, upgrade, learn to play.. yup!!!
    • View Profile
    • www.squier-talk.com
Re: A15 Headstock Logo needed
« Reply #1 on: July 16, 2013, 06:59:39 AM »
Hi Jimmysoap,

Welcome to Washburn forum..  Just want to make sure I understand what your doing, you want to refinish the headstock logo that came off, is that correct?  You want a waterslide of 'Washburn' for your headstock.  Two options you have are: pay someone to make the waterslide or you can make your own waterslide...  Make sure the face of the headstock is clean and straight...  After applying the clear coat and waterslide name and sanding and then few more coats of clear..  remember to wet sand after every coat.  At least that is what others post in their tutorial.
Force 84 ABT B-30 MR
Festival 90 EA20B
Billy T 94 Bk
Bantam 96 XB400 Bttrsctch, 98 XB500 Bk, 94 XB600 BkFlam
Maverick  98 BTM MR/MB, 97 BT3 Rd, BT-4 Tobacobrst, 97 BT-6 MtlFlkBk
01 RB2000 Bk
04 WG587 MR
X-series 05 X-33 Bk
Idol 05 WI36 Bk, 05 WI64 Bk
Comfort 14 WCG18CE Na
Wing 84 T-bird Tobacobrst

Offline jimmysoap

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: A15 Headstock Logo needed
« Reply #2 on: July 18, 2013, 12:07:09 PM »
I made a mistake when categorizing the guitar.  It actually is an electric Stage series A15.  I'll repost my request under electrics.