Username: Password:

Author Topic: Grover locking tuners for 2014 HB35  (Read 1162 times)

Offline Babalooey58

  • Newbie
  • *
  • Posts: 8
    • View Profile
Grover locking tuners for 2014 HB35
« on: November 16, 2015, 08:13:15 PM »
What size of locking tuners should i buy for my HB35? I am looking at these..

Grover 106G Locking Rotomatic Tuners/Machine Heads, 3-Per-Side, GoldOct 25, 2010
by Grover Are these the correct size that i need to order?

Thank you for your response.

$72.59

Thank you,

Robert

[/size]
« Last Edit: November 17, 2015, 06:57:34 PM by Babalooey58 »

Offline C-RAM

  • Newbie
  • *
  • Posts: 26
    • View Profile
Re: Grover locking tuners for 2014 HB35
« Reply #1 on: November 20, 2015, 09:06:30 AM »
A snapshot of the back of your headstock would be helpful, Robert - over the years, Washburn has used  different tuners for the HB-35.
 
Can't speak for a 2014 model, but my 1990 still has its stock Grover machines, and the 106Gs you mention would NOT be direct replacements; if I wanted to replace mine, I would need 406Gs - these have the offset mounting screw as opposed to the 106G, which has the mounting screw located at bottom center.

The 106 is also a full-size machine, and may be too big; I'd wager your guitar came with mid-sized tuners (305 series).

I'd check out Grover's Product Page and try to visually narrow it down:

www.grotro.com/Grover/ROTOMATICS
My Washburns -

A-5, Black
A-10, Charcoal Translucent
A-10, Red Translucent
A-10, Green Translucent
A-20 Reissue, Honey Burst
HB-30, Tobacco Sunburst
HB-32DM
HB-32DMK
HB-35, Natural
J-6S, Natural
T14FL Taurus Bass, Black

Offline Babalooey58

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Grover locking tuners for 2014 HB35
« Reply #2 on: December 21, 2015, 07:31:44 PM »
I tryed to add a pic but could not figure out how to. It put the file name in quotations and did not show it after posting it. I hate to ask but i would appreciate any guidance on adding a pic or file.

THank you,

Robert