Username: Password:

Author Topic: Need roller bridge for J9v  (Read 924 times)

Offline staxuk

  • Newbie
  • *
  • Posts: 2
    • View Profile
Need roller bridge for J9v
« on: January 12, 2016, 11:08:52 AM »
Trying to find a new bridge for the J9v after a few too many string breakages, I did sand the saddles to smooth them up but I think a roller might be better.
The adjusting posts on everything I've found are spaced too far apart compared to the Washburn one so would appreciate info on where I could get one or maybe fitting new roller saddles to the original bridge.
Cheers.

Offline staxuk

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Need roller bridge for J9v
« Reply #1 on: January 31, 2016, 07:32:32 AM »
In case anybody is interested I bought some roller saddles from axes r us which fitted the original bridge perfectly although you have to use the original screws as the ones the new saddles come with are for narrower bridges.
Fiddly job getting the little clips back but well worth doing.
« Last Edit: January 31, 2016, 07:35:16 AM by staxuk »