Username: Password:

Author Topic: Washburn WCD 18 Bridge pins.  (Read 727 times)

Offline gkielczewski

  • Newbie
  • *
  • Posts: 2
    • View Profile
Washburn WCD 18 Bridge pins.
« on: September 17, 2017, 03:18:27 PM »
Hey folks:  Can anyone tell me what size the bridge pins are on the WCD 18  and where to get the proper ones. They are a larger sized pin.

Offline YerDugliness

  • Hero Member
  • *****
  • Posts: 3152
  • Pearl, TX jams at: www.pearlbluegrass.com/
    • View Profile
Re: Washburn WCD 18 Bridge pins.
« Reply #1 on: September 19, 2017, 01:11:42 PM »
Are you missing just one?

If so, you can send one of your other bridge pins to Bob Colosi at www.guitarsaddles.com and he will reproduce it for you in your choice of materials (check out his website).

Otherwise, if you're just replacing a factory pin, I'd suggest getting hold of Washburn's customer service department.

I just recently received two new Washburn acoustic guitars...each of them came from the factory with an extra pin and an extra saddle. If yours is new, perhaps check the packet of stuff that came with it from the factory, there may be a nice surprise waiting for you there.

Cheers!

Dugly 8)
YerDugliness,Esq./Post No Bills
Guitar Playin' FOOL, attempting to age disgracefully!
Washburns:WD32SW,D61SW,D62SW,C124SWK,
WMJ21S(2),WGO26SCE,WSJ60SKELITE,WG26S (2).
Other fine acoustics:Breedlove custom shop 000,Hippner #506 Hauser,Takamini 2005 LTD,Epi Masterbilt AJ500RC