Username: Password:

Author Topic: XLR output  (Read 622 times)

Offline broz1

  • Newbie
  • *
  • Posts: 9
    • View Profile
XLR output
« on: April 29, 2018, 02:16:36 PM »
Hi, this is probably a dumb question to most of you... but under what circumstances/situation would I use the XLR output on my EA36?

Offline WEBgUy

  • Forum Admin
  • Administrator
  • Sr. Member
  • *****
  • Posts: 273
    • View Profile
    • http://www.usmusiccorp.com
Re: XLR output
« Reply #1 on: May 02, 2018, 10:59:33 AM »
The XLR is best suited when you have a performance situation that has a great house PA system.  The lo impedance matches that of a good mixing console so the signal to the board is comparable to all the mics that are also in the console....all round easier for the sound guy to work with.  Great also when your house guy forgot to bring DI boxes!


Lot of acoustic amps are two channel, one channel usually has an xlr....you can use the xlr channel of the amp as an option as well!

 

Offline broz1

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: XLR output
« Reply #2 on: May 02, 2018, 01:59:11 PM »
Most informative answer, thanks!

Yes, my Fishman Loudbox Mini has both instrument and mic channel, the latter having an XLR input of course, so can I run the guitar through this too? Not sure why I would want though!