Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - stratman88

Pages: [1]
1
Idol Series / Re: WI66 Pro pickup and pots replacement?
« on: April 30, 2013, 09:14:43 AM »
Hi,

If anyone is still reading this post then here are a list of parts available in the U.K for direct replacement for the Washburn WI66 Pro without needing to make the holes in the body of the guitar any bigger.

I will also include a wiring diagram to give you:-
1 x neck pickup volume with push pull coil tap
1 x bridge pickup volume with push pull coil tap
1 x neck pickup tone with push pull in / out of phase
1 x bridge pickup tone with push pull series / parallel

This will give you any combination you desire similar to the Gibson Les Paul Jimmy Page for around £40.00 ( at todays prices ).

4 x 500k Audio Taper ( Log A ) Alpha Push / Pull Pots ( 2 for tone and 2 for volume )
http://www.axesrus.co.uk/Medium-Shaft-PushPull-Alpha-Pots-p/medpushpullalpha.htm

2 x Sprague Film and Foil Caps 0.022 @ 200v ( for the tone pots )
http://www.axesrus.co.uk/2-x-Sprague-Film-and-Foil-Caps-p/sprafilmfoil-0022-200v.htm
OR
2 x Sprague Orange Drops 0.022 @ 200v ( for the tone pots )
http://www.axesrus.co.uk/2-x-Sprague-Orange-Drops-p/m0.htm

1 x Switchcraft Mono Jack Socket
http://www.axesrus.co.uk/Switchcraft-Mono-Jack-Socket-p/switchcraftsocket.htm

Pot wire 60" Cloth and Wax wire, Insulated, Cable, in a Yellow and Black sleeve
http://www.axesrus.co.uk/Pot-wire-60-Cloth-and-Wax-wire-Insulated-Cable-p/clothwax-yw-bk.htm

Here is the wiring diagram :-



Hope that helps someone.

Pages: [1]